Configuring Peer Server Profile

Detailed documentation on how to use it in Fiorano is available in Fiorano documentation. Few screenshots are shown here for reference purpose.

1. Stop the Fiorano Peer server if it is running.
2. In eStudio, go to the Profile Management perspective and open the Peer server profile.
3. Navigate to FPS > Fiorano > Esb > Jetty > Jetty.
4. Enable SSLEnabled checkbox and provide values for the properties KeystoreLocation, KeystorePassword, KeyPassword, TruststoreLocation and TruststorePassword. In this example, the password used is "fioranopass".
   
   
   
   
5. Save the profile.

Configuring Stub microservices

1. Configure the REST Stub microservice.
2. Open SSL Configuration. Enable the properties Use SSL, Accept Server Certificate and Ignore Hostname Mismatch.
   
   
   
   
3. Save the configuration and launch the Event process.
4. When the REST Stub microservice turns green, right-click the microservice and select the Copy WADL URL option.
5. Open the WADL URL in the browser. An https URL and certificate details will be displayed.
   
   
   
   
6. The Certificate chain can also be viewed in the Details tab.
   
   

Additional Options

1. In case of a 2-way authentication, provide values for Keystore Location, Key Store Password, Key Client Password properties, Trust Store Location and Trust Store Password in the Rest Stub configuration.
2. If the Accept Server option is disabled, then provide the truststore details in the configuration.