Contents

11.3.1 Online Configuration of Repeater Through Studio

For instructions regarding configuring and monitoring the repeater in the on-line mode refer to the section 25.7 Working with Repeater.

11.3.2 Online Configuration of Repeater Through JMX

This section describes all the configurations of Repeaters using the JMX connection.

11.3.2.1 Adding StandAloneRepeater node in the Server Explorer

To add a new StandAloneRepeater node, the steps listed below need to be followed:

  1. In the Server Explorer pane, right-click the FMQ-JMX node, and click the Copy option.
  2. Right-click the Servers node and click the Paste option.
  3. Rename the new FMQ-JMX_1 to StandAloneRepeater.
  4. In the properties window, change the RMIConnector's ConnectorPort to 2059.

The administrator can create new replication links dynamically. This enables the applications to replicate messages on topics that are created after the repeater has started. Information such as the name of the link name, the source and target servers between the link, the protocol to be used for connection and login information, need to be provided when a new link is added to the repeater. To add a new link, follow the steps below:

  1. Run the FMQ Server and run the StandAloneRepeater.
  2. From the Server Explorer pane, login into StandAloneRepeater.
  3. Navigate to Fiorano > Repeater > RepeaterManager > FioranoRepeaterManager and select the FioranoRepeaterManager node.
     


  4. Right-click and select the addLink(LinkConfig) from the drop-down menu. The Invoke addLink(LinkConfig) dialog box is displayed.
     




  5. Click the editor button of parameter LinkConfig. The addLink(LinkConfig) – LinkConfig dialog box is displayed.
     


  6. Enter all required details. These include:

    Parameter

    Default value

    linkName

    Link-1

    sourceServerName

    FMQ

    sourceServerPassword

    anonymous

    sourceServerProtocol

    TCP

    sourceServerSecurityManager

    Repeater

    sourceServerURL

    http://localhost:1856

    sourceServerUserName

    anonymous

    targetServerName

    FMQ

    targetServerPassword

    anonymous

    targetServerProtocol

    TCP

    targetServerSecurityManager

    Repeater

    targetServerURL

    http://localhost:1856

    targetServerUserName

    anonymous

  7. Click OK and Invoke the operation.
  8. Close the addLink operation dialogue box.

11.3.2.3 Adding a Link Topic

It is possible for the administrator to add one or more link topics to an existing topic. To add a link topic to an existing topic information such as the source topic name, the target topic name and the message selector need to be provided. To add a link topic follow the steps below:

  1. Navigate to Fiorano > Repeater > Link, right-click the mouse and click the Refresh option; a link gets added.
  2. Click the link displayed and select RepeaterLink MBean as shown in the figure below.
     


  3. Right-click the RepeaterLink MBean and select operation addLinkTopic(LinkTopicConfig). The Invoke addLinkTopic(LinkTopicConfig) dialog box is displayed.




  4. Click editor button of parameter LinkTopicConfig. The addLinkTopic(LinkTopicConfig) - LinkTopicConfig dialog box is displayed.



  5. Fill the required parameters, click OK and then click Invoke.

11.3.2.4 Adding a Reply Topic

It is possible for the administrator to add one or more reply topics to existing topics. To add one or more reply topics to existing topics information such as the source topic name, the target topic name and message selector need to be provided. To add a Reply topic, follow the steps below:

  1. Navigate to Fiorano > Repeater > Link > (LinkName) and select theRepeaterLink MBean.
  2. Right-click the RepeaterLink MBean and select operation addReplyTopic(ReplyTopicConfig). The InvokeaddReplyTopic(ReplyTopicConfig) dialog box is displayed.
     



  3. Click the editor button of the parameter ReplyTopicConfig. The addReplyTopic(ReplyTopicConfig)- ReplyTopicConfig dialog box is displayed.
     


  4. Specify the properties and click the OK button and Invoke the operation.

The administrator needs to follow the steps below to remove links from a repeater:

  1. Navigate to Fiorano > Repeater > RepeaterManager > FioranoRepeaterManager and select the FioranoRepeaterManager node.
  2. Right-click the FioranoRepeaterManager node and select operation removeLink(LinkName). The InvokeremoveLink(LinkName) dialog box is displayed.





  3. Specify the link name and click Invoke button.

11.3.2.6 Removing a Link Topic

  1. The administrator needs to follow the steps below to remove a link topic from the repeater. Navigate to Fiorano > Repeater > Link > (LinkName) and select the RepeaterLink MBean.
  2. Right-click the RepeaterLink MBean and select removeLinkTopic(LinkTopicConfig).



  3. Other steps are similar to the addLinkTopic.

11.3.2.7 Removing a Reply Topic

The administrator needs to follow the steps below to remove the selected link topic from the repeater:

  1. Navigate to Fiorano > Repeater > Link > (LinkName) and select the RepeaterLink MBean.
  2. Right-click the RepeaterLink MBean and select removeReplyTopic(ReplyTopicConfig).
     


  3. For additional steps please refer to addReplyTopic.

11.3.2.8 Viewing Durable Subscribers for a Repeater

  1. Navigate to Fiorano > Repeater > RepeaterManager > FioranoRepeaterManager and select the FioranoRepeaterManager node.
  2. Right-click the FioranoRepeaterManager node and select findDurSubscriptionInfo().

Adaptavist ThemeBuilder EngineAtlassian Confluence