Contents

Configuring the Web Management Tool

Follow the steps below to configure the JettyServer within the FioraoMQ Server profile:

  1. Open FioranoMQ profile in Studio. Navigate to FioranoMQ > Fiorano > etc > JettyServer. You can see various properties in the Properties of JettyServer pane.


    Figure 1: Properties of JettyServer Pane
     
  2. In ComponentInstance Configuration,

    1. Enable the EnableStart property for using the Web Management tool.

      Icon

      By default, this property will be in the enabled state.

    2. The default PortNumber is 1780. All Web Management tool users connect to this port. This port number must be unique for every StandAlone FioranoMQ Server running on the same IP address.
Icon
  • The EnableStart and PortNumber properties must be configured before starting the FioranoMQ Server.
  • All the parameters related to the WMT are present in the properties panel. These parameters may be changed in the online mode but ensure that the server is restarted after the configurations are saved.

Connecting to the Web Management Tool

To use FioranoMQ WMT, the latest version of the web browser (Internet Explorer, Mozilla Firefox, Safari, Opera) is needed. The WMT URL format is http://ipaddress:jettyport. 

Icon

In the above URL format, the 'ipaddress' refers to the IP address or hostname (only one ipaddress is present) where the FioranoMQ Server is running and 'jettyport' refers to the port on which the WMT is running.

Icon

If the FioranoMQ server is running on the IP address 192.168.1.46 and the WMT Server is running on the port 1780, the URL will be http://192.168.1.46:1780/.


Figure 2: FioranoMQ Web Management Tool Homepage

The WMT homepage has three fields:

Field Name

Description

User

The user name by which a user logs in to the WMT. The user logging in must exist in the security Realm of FioranoMQ Server. The default User is 'admin'.

Password

Password pertaining to the user name by which the User connects to the WMT. The default password for the 'admin' is pre-configured.

Refresh Interval

Time interval after which data is fetched from the server. This interval is measured in milli seconds. The value of this interval should be more than 1000 milliseconds. The default value is 2000 (which equivalent to two seconds). This interval is sufficiently large to allow minimum CPU usage.

Icon

To perform certain operations, administrator permissions are required.

Adaptavist ThemeBuilder EngineAtlassian Confluence