tributes to retur
<Description>
Component Configuration
The following properties can be configured in the Configuration panel as shown below.
Figure 1: Component Configuration Properties
Error handling configuration
The remedial actions to be taken when a particular error occurs can be configured using this attribute.
Click the ellipses button against this property to configure Error Handling properties for different types of Errors.
Refer to the Error Handling section in the Common Configurations page for detailed information.
Event Name
<>
Connection Configuration
Provide the server details in order to enable sending events and receiving response. Click the Ellipsis button to configure connection details.
- Server IP: Specify the hostname or IP address of the Datadog server.
- Port Number: Specify the port number of the Datadog server
Event Priority
Specify the level of priority with which events need to be sent to the Datadog; choose from the following options in the drop-down:
- normal
- low
Additional Configuration
To send events with tags to Datadog server.
Send event as Alert
Enable this property if the event has to be sent as an alert.
Alert Type
choose from the Alert Types that appear in the Alert Type property drop-down options below:
- error
- warning
- info
- success
Expert Properties
Enable the Expert Properties view to configure these properties.
Figure : Datadog CPS with the Expert Properties enabled and highlighted
Pre Processing XSL Configuration
Pre Processing XSL configuration can be used to transform request message before processing it. Click the ellipses button against the property to configure the properties.
Refer to the Pre/Post Processing XSL Configuration section under the Common Configurations page for details regarding Pre Processing XSL configuration and Post Processing XSL configuration (below).
Post Processing XSL Configuration
Post Processing XSL configuration can be used to transform response message before sending it to the output port.
Process Message Based on Property
The property helps components to skip certain messages from processing.
Refer to the Process Message Based On a Property section under the Common Configurations page.
Threadpool Configuration
This property is used when there is a need to process messages in parallel within the component, still maintaining the sequence from the external perspective.
- This needs to be used only in such circumstances.
- If sequential processing is not required, please use sessions on the input port.
Click the Threadpool Configuration ellipses button to configure the Threadpool Configuration properties.
Figure 33: Threadpool Configuration properties
Enable Thread Pool
Enable this option to configure the properties that appear as below.
Pool Size
The number of requests to be processed in parallel within the component. Default value is '1'.
Batch Eviction Interval (in ms)
Time in milliseconds after which the threads are evicted in case of inactivity. New threads are created in place of evicted threads when new requests are received. Default value is '1000'.
Functional Demonstration
Configure the component with various operations as described in the component description and connect Feeder and Display components to send input and receive output respectively.
Figure : Event Process to demonstrate functions of Datadog
Points to Note
<>