tributes to retur
<Description>
Component Configuration
The following properties can be configured in the Configuration panel as shown below.
Figure 1: Component Configuration Properties
Validate Input
If this attribute is enabled, the service tries to validate the input received. If disabled, service will not validate the input. For more details, refer Validate Input section under Interaction Configurations in the Common Configurations page.
Error handling configuration
The remedial actions to be taken when a particular error occurs can be configured using this attribute.
Click the ellipses button against this property to configure Error Handling properties for different types of Errors.
Refer to the Error Handling section in the Common Configurations page for detailed information.
AWS Connection Details
Click the AWS Connection Details ellipses button to configure the properties related to AWS connection.
Figure 2: AWS Connection Properties
Access key
Specify the Access Key id
Secret key
Specify the Secret Key
Region
The region of the AWS Management console.
Mode
Specify whether to publish or subscribe to the topic.
Topic ARN
<>
Create New Topic
<>
Enable SSE
<>
Expert Properties
Enable the Expert Properties view to configure these properties.
Figure : AmazonSNS CPS with the Expert Properties enabled and highlighted
Pre Processing XSL Configuration
Pre Processing XSL configuration can be used to transform request message before processing it. Click the ellipses button against the property to configure the properties.
Refer to the Pre/Post Processing XSL Configuration section under the Common Configurations page for details regarding Pre Processing XSL configuration and Post Processing XSL configuration (below).
Post Processing XSL Configuration
Post Processing XSL configuration can be used to transform response message before sending it to the output port.
Process Message Based on Property
The property helps components to skip certain messages from processing.
Refer to the Process Message Based On a Property section under the Common Configurations page.
Threadpool Configuration
This property is used when there is a need to process messages in parallel within the component, still maintaining the sequence from the external perspective.
Functional Demonstration
Configure the component with various operations as described in the component description and connect Feeder and Display components to send input and receive output respectively.
Figure : Event Process to demonstrate functions of AmazonSNS
Points to Note
<>