Configuring the Jetty Server with SSL Support

Since SSL support is provided for Jetty, it is possible to configure the SSL parameters for Jetty running with Gateway by editing corresponding AGS profiles.

By default, the SSL property for Jetty is disabled. To enable this property, perform the actions below:

1. Go to the eStudio application and open the AGS profile from the Profile Management perspective before starting the AGS server.
    
2. Navigate to APIGateway > Jetty > PeerAPIManagementJetty , and select the SSLEnabled properties checkbox.
   
   
   Figure 1: Configuring Jetty for AGS
    
3. Specify the values for KeyStoreLocation, KeyStorePassword, TrustStore, TrustStorePasswd and save the AGS profile.
   
   
   Figure 2: Configuring Jetty for AGS
    
4. Start the servers. Jetty gets started with SSL enabled.