Page History

Versions Compared

Old Version 1

changes.mady.by.user Prathewraj M

Saved on Jan 18, 2018

compared with

New Version 2

changes.mady.by.user Prathewraj M

Saved on Sep 12, 2022

Key

This line was added.
This line was removed.
Formatting was changed.

...

Follow the steps below to configure the JettyServer within the FioraoMQ Server profile:

Open FioranoMQ profile in Studio. Navigate to FioranoMQ > Fiorano > etc > JettyServer. You can see various properties in the Properties of JettyServer pane.

Figure 1: Properties of JettyServer Pane
In ComponentInstance Configuration,
1. Set the EnableStart property to yes for
  Enable the EnableStart property for using the Web Management tool.
  Info
  By default, this property
  is set to yes
  will be in the enabled state.
2. The default PortNumber is 1780. All Web Management tool users connect to this port. This port number must be unique for every StandAlone FioranoMQ Server running on the same IP address.

Note
The EnableStart and PortNumber must properties must be configured before starting the FioranoMQ Server. All the parameters related to the WMT are present in the properties panel. These parameters may be changed in the online mode but require ensure that the server is restarted once after the configurations are saved.

...

To use FioranoMQ WMT, the latest version of the web browser (Internet Explorer, Mozilla Firefox, Safari, Opera) is needed. The WMT URL format is http://ipaddress:jettyport. In this URL

Info

In the above URL format, the 'ipaddress' refers to the IP address or hostname (only one ipaddress is present) where the FioranoMQ Server is running and 'jettyport' refers to the port on which the WMT is running.

Tip
If the FioranoMQ server is running on the IP address 192.168.1.46 and the WMT Server is running on the port 1780, the URL will

...

be http://192.168.1.46:1780/.

Figure 2: FioranoMQ Web Management Tool Homepage

...

Field Name	Description
User	The User Name user name by which User will login tothe a user logs in to the WMT. The User user logging in must exist in the security Realm of FioranoMQ Server. The default User is 'admin'.
Password	Password of the User Name pertaining to the user name by which the User connects to the WMT. The default password for the 'admin' is pre set-configured.
Refresh Interval	Time Interval interval after which data is fetched from the Serverserver. This Interval interval is measured in milli seconds. The value of this interval should be more than 1000 milliseconds. The default value is 2000 (which equivalent to two seconds). This interval should be is sufficiently large to allow minimum CPU usage.

Warning
To perform certain

...

operations, administrator permissions are required.