Page History

...

1. Open Profile Management perspective (Window > Open Perspective > Other > Profile Management)

   Note
   Ensure that Enterprise Server (FES) is not running; stop the FES in case you have started it.

   
   Image RemovedImage Added
   Figure 1: Opening Profile Management perspective
    

2. Right-click Profiles and open FES profile (Load Profile > Fiorano ESB > Profile1 > FES)
   Image Removed
   Image Added
   Figure 2: Opening FES profile
    
3. In FES window, expand FES > Fiorano > Esb > B2B and select B2BJetty. Then select EnableStart checkbox present in ComponentInstance Configuration section under Properties of B2BJetty screen and save (File > Save or press Save icon) the changes.
   Image Removed
   Image Added
   Figure 3: Properties of B2BJetty screen

...

1. Add the path of the database jar (ojdbc6Eg: ojdbc7.jar) in configuration file: fes.conf, present in: FioranoHome\esb\fes\bin (this file has the set up required to run the FES).
   Image Removed
   Image Added
   Figure 4: Adding jdbc path in FES Configuration file
    

2. Also, comment out the line present under the instruction (the instruction says "Comment out the below line if using Yawl OR B2B with ESB") that says to do so and then save and close the file.
   Image Removed
   Image Added
   Figure 5: Commenting out a line in FES Configuration file

   Note
   In case you are starting the server from the location FioranoHome\esb\server\bin, the driver path has to be added in the server.conf configuration file present in that location.

...

server.bat/.sh –mode fes

If you scroll Scroll up in the fes console , you can to find the RMI port number : - 2047.

Figure 6: FES console showing RMI port number

...

After ensuring that the servers are up and running, continue with the following steps sections to configure the Fiorano B2B Dashboard.