As Since SSL support is provided for Jetty, you can it is possible to configure the SSL parameters for Jetty running with Gateway by editing the corresponding AGS profiles.
By default, the SSL property for Jetty is disabled. To enable this property, perform the following actions below:
- Go to the eStudio application and open the AGS profile from the Profile Management perspective before starting the AGS server.
- Navigate to APIGateway > Jetty > PeerAPIManagementJetty , and select the SSLEnabled properties checkbox.
Figure 1: Configuring Jetty for AGS
- Specify the values for KeyStoreLocation, KeyStorePassword, TrustStore, TrustStorePasswd and save the AGS profile.
Figure 2: Configuring Jetty for AGS
- Start the servers. Jetty gets started with the SSL enabled.
Overview
Content Tools
ThemeBuilder