Contents
Contents

Configuring the Angular Web Management Tool

Follow the steps below to configure the JettyServer within the FioranoMQ Server profile:

  1. Open FioranoMQ profile in eStudio. Navigate to FioranoMQ > Fiorano > etc > JettyServer. Properties pertaining to the Jetty Server gets displayed in the Properties of JettyServer pane on the right side.


    Figure 1: Properties of JettyServer Pane
     
  2. In ComponentInstance Configuration,

    1. Enable the EnableStart property for using the Web Management tool.

      Icon

      By default, this property will be in the enabled state.

    2. The default PortNumber is 1780. All Web Management tool users connect to this port. This port number must be unique for every StandAlone FioranoMQ Server running on the same IP address.
Icon
  • The EnableStart and PortNumber properties must be configured before starting the FioranoMQ Server.

  • All the parameters related to the WMT Angular tool are present in the properties panel.

Connecting to the Web Management Tool

To use FioranoMQ WMT Angular, the latest version of the web browser (Google Chrome, Mozilla Firefox, Safari, or Opera) is needed. The WMT Angular URL format is http://ipaddress:jettyport/angular.

Icon

In the above URL format, the 'ipaddress' refers to the IP address or hostname (only one ipaddress is present) where the FioranoMQ Server is running and 'jettyport' refers to the port on which the Jetty server is running.

Icon

If the FioranoMQ server is running on the IP address 192.168.1.46 and the Jetty Server is running on the port 1780, the URL will be http://192.168.1.46:1780/angular.


Figure 2: FioranoMQ Angular Web Management Tool Homepage

The WMT homepage has three fields:

Field Name

Description

User

The user name by which a user logs in to the WMT Angular. The user logging in must exist in the security Realm of FioranoMQ Server. The default User is 'admin'.

Password

Password pertaining to the user name by which the user connects to the WMT Angular. The default password for the 'admin' user is pre-configured.

Refresh Interval

Time interval after which data is fetched from the server. This interval is measured in milli seconds. The value of this interval should be more than 1000 milliseconds. The default value is 2000 (which is equivalent to two seconds). This interval is sufficiently large to allow minimum CPU usage.

Icon

To perform certain operations, administrator permissions are required.

Adaptavist ThemeBuilder EngineAtlassian Confluence