Page History

...

The Bridge can be configured in two ways though through the online mode. All added configurations work as long as the Bridge is running. Once the Bridge is stopped, all configurations are lost.

...

1. Navigate to JMX Connection > Fiorano > Bridge > FioranoConnectorManager.
    Image Removed
   
2. Right-click the FioranoConnectionManager and select the View Operations option.
3. Select the addLink(LinkConfiguration) option from the pop-up menu. A LinkConfiguration dialog box is displayed, as shown in the figure below. option from the FioranoConnectionManager dialog box.
    
   Image Added
   
   
4. Invoke the addLink operation by assigning appropriate values to LinkConfiguration.
    
   Image Added
   Image Removed
   
   
5. Once theLink is created, navigate to JMX Connection > Fiorano > Bridge > Link > LinkName. The LinkName is provided by the User when creating the link. (If the Link runtime MBean is not displayed via Studio, right-click the Link to refresh it). Perform the addChannel operation by assigning appropriate values in the configuration wizard.
    
   Image RemovedImage Added
   
   
6. The add channel 'function' is visible to the user at the end of performing the add channel operation. A User can modify the link configuration by performing the editLinkConfiguration operation. All offline operations can be performed here while corresponding operations are performed at appropriate locations.

...

1. Change the RMI ConnectorPort to the port on which the Bridge is running. By default, the ConnectorPort is 1858. Change the ConnectorPort to 1899 for StandAloneBridge. Log into the FMQ server through StudioeStudio.
    
   Image RemovedImage Added
   
   
2. After logging into the FMQ server, right-click on the Bridge and click the Add Link option from the pop-up menu. The New Link Properties dialog box is displayed.
    
   Image RemovedImage Added
   
   
3. In the New Link Properties dialog box, click the show expert properties icon (which is yellow in color) displayed at the top of the property sheet.
    
   Image RemovedImage Added
   
   
4. All the required properties are shown on the property sheet.
    
   Image RemovedImage Added
   
   
5. Add the appropriate values to the required properties. Server Advanced Params ' can remain empty. Studio eStudio will display the new configurations. Detailed configurations are shown only if show expert property is enabled.
6. Right-click on the new link and perform the add channel operation.
7. Assign the appropriate valued values through the input wizard. Properties are uneditable. Once the configuration is added, a User is unable to edit parameter values. If the User needs to alter these values then the link or the channel should be deleted and replaced with a link and/or a channel that has the required parameters.