...
Follow the steps below to configure the JettyServer within the FioraoMQ Server profile:
- Open Open FioranoMQ profile profile in StudioeStudio. Navigate to FioranoMQ to FioranoMQ > Fiorano Fiorano > etc etc > JettyServer. You can see various properties in the JettyServer. Properties pertaining to the Jetty Server gets displayed in the Properties of JettyServer pane pane on the right side.
Figure 1: Properties of JettyServer Pane
- In ComponentInstance Configuration,
- Set the EnableStart property to yes for
Enable the EnableStart property for using the Web Management tool.
is set to yesInfo By default, this property
will be in the enabled state.
- The default PortNumber is 1780. All Web Management tool users connect to this port. This port number must be unique for every StandAlone FioranoMQ Server running on the same IP address.
- Set the EnableStart property to yes for
Note |
---|
|
...
Connecting to the Web Management Tool
To use FioranoMQ WMT, the latest version of the web browser (Internet Explorer, Mozilla Firefox, Safari, Opera) is needed. The WMT URL format is http://ipaddress:jettyport. In this URL
Info |
---|
In the above URL format, the 'ipaddress' refers to the IP address or hostname (only one ipaddress is present) where the FioranoMQ Server is running and 'jettyport' refers to the port on which the |
...
Jetty Server is running.
|
...
|
...
|
Figure 2: FioranoMQ Web Management Tool Homepage
...
Field Name | Description |
---|---|
User | The User Name user name by which User will login tothe a user logs in to the WMT. The User user logging in must exist in the security Realm of FioranoMQ Server. The default User is 'admin'. |
Password | Password of the User Name pertaining to the user name by which the User connects to the WMT. The default password for the 'admin' is pre set-configured. |
Refresh Interval | Time Interval interval after which data is fetched from the Serverserver. This Interval interval is measured in milli seconds. The value of this interval should be more than 1000 milliseconds. The default value is 2000 (which equivalent to two seconds). This interval should be is sufficiently large to allow minimum CPU usage. |
Warning |
---|
To perform certain |
...
operations, administrator permissions are required. |