Contents

Versions Compared

Old Version 4

changes.mady.by.user Prathewraj M

Saved on

compared with

New Version 5

changes.mady.by.user Prathewraj M

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Follow the steps below to configure the JettyServer within the FioraoMQ Server profile:

  1. Open Open FioranoMQ profile  profile in eStudio. Navigate to FioranoMQ to FioranoMQ > Fiorano  Fiorano > etc  etc > JettyServer. You can see various properties in the  JettyServer. Properties pertaining to the Jetty Server gets displayed in the Properties of JettyServer pane pane on the right side.
    Image Removed
    Image Added
    Figure 1: Properties of JettyServer Pane
     
  2. In ComponentInstance Configuration,

    1. Enable the EnableStart property for using the Web Management tool.

      Info

      By default, this property will be in the enabled state.

    2. The default PortNumber is 1780. All Web Management tool users connect to this port. This port number must be unique for every StandAlone FioranoMQ Server running on the same IP address.
Note
  • The EnableStart and PortNumber properties must be configured before starting the FioranoMQ Server.

  • All the parameters related to the WMT Angular tool are present in the properties panel.

...

Connecting to the Web Management Tool

...

Info

In the above URL format, the 'ipaddress' refers to the IP address or hostname (only one ipaddress is present) where the FioranoMQ Server is running and 'jettyport' refers to the port on which the Jetty Server is running.

Tip

If the FioranoMQ server is running on the IP address 192.168.1.46 and the Jetty server is running on the port 1780, the URL will be http://192.168.1.46:1780/.

Image RemovedImage Added
Figure 2: FioranoMQ Web Management Tool Homepage

...

Adaptavist ThemeBuilder EngineAtlassian Confluence