Contents

Versions Compared

Old Version 3

changes.mady.by.user Prathewraj M

Saved on

compared with

New Version 4

changes.mady.by.user Prathewraj M

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Open FioranoMQ profile in eStudio. Navigate to FioranoMQ > Fiorano > etc > JettyServer. You can see various properties in the Properties of JettyServer pane.


    Figure 1: Properties of JettyServer Pane
     
  2. In ComponentInstance Configuration,

    1. Enable the EnableStart property for using the Web Management tool.

      Info

      By default, this property will be in the enabled state.

    2. The default PortNumber is 1780. All Web Management tool users connect to this port. This port number must be unique for every StandAlone FioranoMQ Server running on the same IP address.
Note

The EnableStart and PortNumber properties must be configured before starting the FioranoMQ Server.

  • All the parameters related to the WMT are present in the properties panel. These parameters may be changed in the online mode but ensure that the server is restarted after the configurations are saved.

    • ...

    Connecting to the Web Management Tool

    ...

    Info

    In the above URL format, the 'ipaddress' refers to the IP address or hostname (only one ipaddress is present) where the FioranoMQ Server is running and 'jettyport' refers to the port on which the WMT Jetty Server is running.

    Tip

    If the FioranoMQ server is running on the IP address 192.168.1.46 and the WMT Server Jetty server is running on the port 1780, the URL will be http://192.168.1.46:1780/.

    ...

    Adaptavist ThemeBuilder EngineAtlassian Confluence