This option is used to analyze a specific cross section of a graph. This is particularly useful in analyzing to analyze any anomalies like peaks in traffic and drill traffic by drilling down using various conditions.
To do this analysis, after After selecting the criteria, you just need to select the required region by clicking the starting point of your choice and then the end point; this zooms magnifies the area that you chosethe area chosen.
| Note |
|---|
The Analyze Data option is only available for Line and Area chart types. |
Consider a graph generated using group by condition. If you want to To analyze data for a particular minute , say "14:30" minutes, select the area between 14:00 and 14:38 (as per the graph in consideration) by following the steps below:
- In the graph, click the small dot on the graph which represents the starting time (14:00) under consideration. The area selected area will be marked by a vertical line.
Figure 1: Analytics section with the starting point selected
- Now click Click the small dot that represents the time that is preferred to be the end point (14:38); a zoomed magnified form of the selected area of the graph appears.
Figure 2: Graph for the selected area, holding data for start time of 14:30 and its end time 14:38
...